Idea On How To Do Pipes Right

Is your plumbing giving you a headache? Do you want to improve your plumbing skills? If you're ready to get started, then this is article for you! This article contains tips that will advise you on how to improve your home plumbing system.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.



If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.

Do not put cooking oils, fat, or grease, down your drain. http://www.news9.com/story/38133847/attorney-accuses-metro-plumber-of-shoddy-work-on-sober-living-units cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet's tank (not the water in the bowl). Check https://www.bobvila.com/articles/frozen-pipes/ in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet's tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they're sealed up.

If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.

Keep an eye on your monthly water bill to catch plumbing problems. Has your water bill gone up recently, even though nothing's changed? This could indicate a water leak or appliance problem somewhere inside or outside of your home. Check under sinks for rusted pipes, look for water puddles under outside faucets, and consider having a plumber come out to listen to your pipes to detect running water.

Keeping up with maintenance is the number one way to keep plumbers from having to come fix issues. Drain clogs are a common plumbing expense. Hair is one of the most common clog-producing materials. You can prevent this from occurring by using a drain cover or a screen that is meant to keep the hair out of the drain and pipes. Getting the hair off the screen is much simpler than removing it from the pipe.

Those valves that rarely get used have a way of fusing together. Maintain them with penetrating oil, and turn them every so often to keep them from sticking.

If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won't work, because grease will not dissolve in water.

If your lawn has areas where the grass grows very quickly compared to the rest, seems constantly wet or has a noxious odor you may have a sewer line leak. A leak or crack in sewage pipes can be repaired if caught early and save thousands of dollars in failed septic inspection expenses.

A plumbing snake is an essential tool in any homeowner's tool box. Snakes can be used to unclog kitchen and bathrooms drains and toilets when clogged with hardened debris. They are useful as well for grabbing hold of items dropped down sink drains. Snakes come in a variety of sizes for home use and heavier-duty models can often be rented for bigger jobs.

If you are seeing areas in your ceiling or walls that appear to have water damage or are sagging, make sure you turn off the power before inspecting. Electricity and water do not mix. The last thing you need is to go into the attic and get shocked by a pool of water.


To help keep your drains working properly you should pay attention to clogs. Clogs are a common problem at home but with proper maintenance and preventive measures you can avoid a messy situation. Clogs are not only an annoyance, but can also lead to overflows and water damage. So make sure you keep your drains clog-free by implementing easy preventative practices.

So, now do you see why plumbing is such an exciting endeavor? Creating your own skills, learning to take care of your system, and being able to fix it yourself to save money is very exciting. The tips above should have created a good foundation for you to build upon and do your own plumbing jobs easily.

Leave a Reply

Your email address will not be published. Required fields are marked *